HP ProLiant MicroServer Gen8 BIOS 2013.11.09
Tipo de archivo: BIOS.
Sistema Operativo: Windows Server 2008, Windows Server 2012.
Nombre del archivo: cp021717.exe.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Correcciones :
– Added additional options to the ROM Based Setup Utility (RBSU) Power-On Delay Option for delay times of 15, 30, 40 and 60 seconds (in addition to the previous options of No Delay and Random Delay). For these new selections to function, the system must be using Integrated Lights-Out (iLO) Firmware version 1.20 or later. If the system is configured to one of the new options without having iLO Firmware version 1.20 or later, the Power-On Delay Option will function as if the No Delay option were chosen.
– Enhanced the System ROM’s detection of valid boot devices such as USB Drive Keys or Hard Drives. Previously, the System ROM may have attempted to boot certain bootable media with invalid boot records resulting in a Non-System Disk error. In some cases, the System ROM will now be able to detect the invalid boot record and skip attempting to boot the device. This allows the System ROM to attempt to boot the next device in the boot order.
– Added the latest product names of optional expansion cards and updated language translations (for non-English modes) in the ROM-Based Setup Utility (RBSU).
To update firmware from Windows operating system on target server:
1. Place the Smart Component in a temporary directory.
2. From the same directory, run the Smart Component by double-clicking it.
3. When the Smart Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
To use HPSUM on the HP Smart Update Firmware DVD (version 9.00 and later) or the Service Pack for ProLiant 2011.07.0 (and later):
1. Place the Firmware DVD or Service Pack for ProLiant on a USB key using the HP USB Key Creator Utility.
2. Place the firmware to be used for updating in the directory, /HPFWUPxxx/hp/swpackages on the USB key.
3. Boot from the newly created USB key.
4. Follow the on-screen directions to complete the firmware update.
Descargar