Hasselblad H3D-31 Camera Body Firmware 2.3.3
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: CB141208.hbf.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
This package contains firmware version 2.3.3/16.0.8 for H2D, H3D and H3DII, H4D camera bodies.
Correcciones:
– If the tethered camera was in B or T-mode and exposure mode was changed from Phocus, exposure time on the camera was not updated correctly. This is now fixed
– If the tethered camera was set to pending self-timer and then released from Phocus, the sequence was not handled properly. This is also fixed.
Pasos de instalación:
1. Descomprima el archivo descargado.
2. Make sure your camera is turned on.
3. Connect the camera to Phocus using a POWERED FireWire cable.
4. Go to “File” and then “Update Firmware” and locate the desired firmware package (CB141208.hbf) on your computer, and click “Update”.
5. Follow the instructions provided from the software carefully! Do not switch off the camera during the update process, unless specifically requested by the Phocus software.
6. When the update has been finalized, please restart your camera and check that the firmware has been successfully updated.
Noticia importante:
– During the upgrade procedure do NOT disconnect the FireWire cable until prompted!
– La eliminación involuntaria del cable FireWire durante el procedimiento de descarga del firmware podría, en el peor de los casos, inutilizar la cámara, lo que requeriría la necesidad de un servicio autorizado.
– Manual updating of firmware is available in the Phocus software, from version 2.7 Mac and 2.7 Windows. However, please use the latest version of Phocus for firmware updating. For Windows it is strongly recommended to use the 64 bit version.
Descargar