GitUp GIT2 Action Camera Firmware 1.5 Beta
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: GIT2FW--V1.5B--0527.7z.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Change log:
1. Added: 4:3 aspect ratio for 2880x2160P 24fps mode
2. Added: Wi-Fi mode option: AP, Station
3. Added: Support customize boot logo
4. Added: Wi-Fi Auto-start option: On, Off
5. Added: Pause icon on screen while recording is paused
6. Added: Colourful color option in video and photo mode (lower saturation compared to Vivid option)
7. Added: New OSD mode, only show video mode and recording dot
8. Added: Video shutter speed 1/48s
9. Added: Contrast option for video and photo: Normal, High, Low
10. Fixed: 2160P 24fps video not smooth
11. Fixed: Camera powered off while the file reached 4GB in quick capture mode
12. Fixed: Camera restarting issue in quick capture mode, plug the charger while recording, then stop recording and unplug the charger after the camera powered off
13. Fixed: Wrong EXIF info
14. Fixed: Video ZOOM issue while AV out in narrow mode
15. Improved: Stop recording in middle level for remote shutter.
16. Improved: Once press shutter button to start/stop recording while in screensave mode
17. Improved: Web camera resolution is upgraded to 1920*1440
18. Improved: Wi-Fi stream resolution is upgraded to 1280×960 if enable the Wi-Fi from 1440P or 1080P 4:3 mode.
19. Improved: Spanish, Czech, Russian, Polish language
Pasos de instalación:
1. Use max. 32GB card formatted by camera or on computer as FAT32
2. Insert card in camera and connect it to computer using USB cable
3. Copy just the GIT2LD.bin on the root of the card
4. After GIT2LD.bin is copied to the card disconnect the camera from computer
5. Reconnect the camera to your computer and wait few seconds until you can chose Mass Storage from camera menu
6. Delete GIT2LD.bin from the card using your PC and
7. Copy the GIT2FW.bin file on the root of the card
8. Reconnect the camera to your computer and wait more seconds until you can chose Mass Storage from camera menu, the front green LED and back red LED will be blinking while upgrading.
How to connect Git2 with the wireless router?
1. Set the Wi-Fi mode on AP mode
2. Put the client.txt file in the SD card root directory, change the SSID and password
3. If set the Wi-Fi auto start option as off, you need long press the Wi-Fi button to enable the Wi-Fi and then connect the router automatically.
4. If set the Wi-Fi auto start option as on, it will connect with router automatically after powered on.
Note: For the Wi-Fi AP mode, if you set the Wi-Fi auto start option as on, it require to restart the camera to enable Wi-Fi automatically.
Descargar