Gigabyte GA-EP45-DS3LR (rev. 1.0) Intel SATA RAID/AHCI Controlador 8.9.0.1023
Tipo de archivo: Controlador.
Sistema Operativo: AnyOS, Windows 10, Windows 7, Windows 8.
Nombre del archivo: motherboard_driver_intel_sataraid.exe.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
GA-EP45-DS3LR (rev. 1.0) specs
CPU
1. Compatibilidad con Intel Core 2 Extreme processor/ Intel Core 2 Quad processor/Intel Core 2 Duo processor/ Intel Pentium Dual-Core processor/Intel Celeron processor in the LGA 775 package
(Note) This motherboard is designed with VRD11.1 power phase, and cannot be compatible with VRD10 designed CPU. Please refer to “CPU Support List” for details.
2. L2 cache varies with CPU
Front Side Bus
1. 1600/1333/1066/800 MHz FSB
Chipset
1. North Bridge: Intel P45 Express Chipset
2. South Bridge: Intel ICH10R
Memory
1. 4 x 1.8V DDR2 DIMM sockets supporting up to 16 GB of system memory
2. Dual channel memory architecture
3. Compatibilidad con DDR2 1333+/1066/800/667 MHz memory modules
(Refer to Memory support list for more information)
Audio
1. Realtek ALC888 codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
4. Compatibilidad con S/PDIF In/Out
5. Compatibilidad con CD In
LAN
1. Realtek 8111C chips (10/100/1000 Mbit)
Expansion Slots
1. 1 x PCI Express x16 slot
(The PCI Expressx16 slot conform to PCI Express 2.0 standard.)
2. 4 x PCI Express x1 slot
3. 2 x PCI slots
Storage Interface South Bridge:
1. 6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices
2. Compatibilidad con SATA RAID 0, RAID 1, RAID 5 and RAID 10
JMicron 368 chip:
1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
iTE IT8718 chip:
1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive
USB
1. Integrated in the South Bridge
2. Up to 12 USB 2.0/1.1 ports
(8 on the back panel, 4 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
1. 1 x 24-pin ATX main power connector
2. 1 x 4-pin ATX 12V power connector
3. 1 x floppy disk drive connector
4. 1 x IDE connector
5. 6 x SATA 3Gb/s connectors
6. 1 x CPU fan header
7. 2 x system fan headers
8. 1 x power fan header
9. 1 x front panel header
10. 1 x front panel audio header
11. 1 x CD In connector
12. 1 x S/PDIF In header
13. 1 x S/PDIF Out header
14. 2 x USB 2.0/1.1 headers
15. 1 x parallel port header
16. 1 x serial port header
17. 1 x power LED header
18. 1 x chassis intrusion header
Back Panel Connectors
1. 1 x PS/2 keyboard port
2. 1 x PS/2 keyboard/mouse port
3. 1 x optical S/PDIF Out connector
4. 1 x coaxial S/PDIF Out connector
5. 8 x USB 2.0/1.1 ports
6. 1 x RJ-45 ports
7. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller
1. iTE IT8718 chip
H/W Monitoring
1. System voltage detection
2. CPU/System temperature detection
3. CPU/System/Power fan speed detection
4. CPU overheating warning
5. CPU/System/Power fan fail warning
6. CPU/System fan speed control
BIOS
1. 2 x 8 Mbit flash
2. Use of licensed AWARD BIOS
3. Compatibilidad con DualBIOS™
4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Se recomienda siempre usar la versión más reciente del controlador.
No olvide consultar con nuestro sitio tan a menudo como sea posible para mantenerse actualizado sobre los últimos controladores, software y juegos.
Intente establecer un punto de restauración del sistema antes de instalar un controlador de dispositivo. Esto ayudará si instaló un controlador incorrecto. Pueden surgir problemas cuando su dispositivo de hardware es demasiado antiguo o ya no es compatible.
Descargar