D-Link DWC-1000 rev.B1 Wireless Controller Firmware 4.3.0.2 WW/RU
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: DWC-1000_REVB_FIRMWARE_4.3.0.2_WW.ZIP.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Revision History:
1. Security Vulnerability Addressed OpenSSL vulnerability (CVE-2014-0224)
Wireless Controller Firmware Upgrade
Path: Maintenance > Firmware > Firmware Upgrade > Using System (PC)
1. In the wireless controller web management interface, click Maintenance > Firmware > Firmware Upgrade.
2. If the firmware version on the D-Link support website has a higher number than the firmware version shown under Firmware Information, continue with this procedure.
3. Download the new firmware from the D-Link website.
4. Under Firmware Upgrade, click the Choose File button.
5. In the Choose File dialog box, navigate to the firmware file, and then click the file and click Open. If you want to upgrade using a file from a USB drive, click the Using USB tab near the top of this page.
6. Click Upgrade.
7. At the confirmation message, click OK to start the firmware upgrade. A progress bar shows the progress of the upgrade.
Note: The upgrade process takes a few minutes. Do not interrupt the upgrade or turn off the system; otherwise, you can damage the firmware. Wait for the upgrade to complete before browsing any sites from your browser.
8. When the upgrade completes, log in to the wireless controller web management interface, click Maintenance > Firmware > Firmware Upgrade, and confirm that the new firmware appears next to Firmware on the Using System (PC) page.
9. Record the firmware level in Appendix A.
Descargar