D-Link DSR-150 rev.A2 Router Firmware 2.02.B401C WW
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: DSR-150_REVA_FIRMWARE_PATCH_2.02.B401C_WW.ZIP.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Problems Resolved:
1. Fixes the OpenSSL Security Vulnerability
CVE-2015-0291 / CVE-2015-0204
CVE-2015-0291 – OpenSSL 1.0.2 ClientHello sigalgs DoS
CVE-2015-0204 – RSA silently downgrades to EXPORT_RSA [Client]
Firmware Update Steps
Do NOT upgrade firmware on any D-Link product over a wireless connection. Failure of the device may result. Use only hard-wired LAN network connections.
1. Save the current routers configuration to file. Tools/System. (Note that reloading this onto new major version of firmware can cause problems and thus is recommended to configure the router from scratch. Do not load the old configuration file from the old major version. If you’re upgrading from minor to minor version, reloading of the configuration file shouldn’t cause a problem. In these cases, please do not upload the previous older configuration file, rather set up the router from scratch. Should you need the configuration information from the previous saved configuration file, capture, copy or write down all required information from the configuration file loaded on the router BEFORE applying the newer firmware update.)
NOTE:
For routers using the new web page UI:
Management -> System Admin -> System
Save Settings To Local Hard Drive
2. Factory reset the router using the routers web page Tools/System, is easiest, or the back button.
3. Update the router using the routers web page Tools/System using the .bin file(s) that was downloaded for your product model. The .bin files have to be unpacked from the .zip file.
4. After the router as updated and status has reported it was successful on the routers web page, power OFF the ISP modem/ONT for 30 seconds then power back ON the modem/ONT. Perform one more Factory reset of the router using the routers web page Tools/System.
5. After the router has reset and come back to ready, reload the saved configuration file or reconfigure the router from scratch and walk thru the set up wizard. Status LEDs should be Blue, Green or White for power and internet (Globe) the router unit depending on model.
NOTE:
Clear all browser caches before and after loading FW files.
Descargar