D-Link DCS-5030L rev.A1 Network Camera Firmware 1.02.13
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: DCS-5030L_REVA_FIRMWARE_1.02.13.ZIP.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
New Features:
1. Upgrade mydlink agent to v2.1.0-b44.
2. Support Mydlink UID mechanism.
3. Change the support page hyperlink of Firmware Upgrade web-UI to www.dlink.com.
4. Updated OpenSSL to v1.0.1t.
5. Updated mDNSResponder to 625.41.2.
6. Modify web-UI message for SD management.
Problems Fixed:
1. Fixed SD card recording issue.
2. Fixed an issue that /config/ptz_move.cgi doesn’t move the camera view in the correct direction when the camera is installed upside down and Flip/Mirror are enabled.
3. Fixed the “RSA-CRT key leaks” vulnerability.
4. Fixed the “LANDAP stack overflow” vulnerability.
5. Remove the “Arbitrary file upload interface” vulnerability.
6. Fixed vulnerability – Authenticated Arbitrary File Upload with Root Privileges.
7. Fixed vulnerability – Authenticated Root OS Command Injection in File Upload.
8. Fixed an XSS vulnerability – Stored XSS in User Name.
9. Fixed an XSS vulnerability – Reflected XSS in HTTP Host Header.
Pasos de instalación:
1. Descargue el último firmware file for your device.
2. Log into your device’s web interface.
– Open Internet Explorer, and browse to your cameras IP address. For example, if your cameras IP address is 192.168.0.100, in the address bar of your web browser type: http://192.168.0.100 .
– Enter your cameras username and password.
3. Click on Maintenance, then on Firmware Upgrade.
4: Click on Browse, select the downloaded firmware and then click the upload button.
Noticia importante:
– All firmware upgrades should be done over a WIRED connection. If your camera is currently configured wireless, plug it directly into your router before proceeding.
– Do not start or use other applications while upgrading your device’s firmware, and do not hit Stop, Back, or Reload in your web browser during the upgrade process.
Descargar