Cisco RV130W Router Firmware 1.0.2.7
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: RV130X_FW_1.0.2.7.bin.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Enhancements:
– GUI improvements.
– Support SNMP access from WAN side.
– Support certificates for IPSec VPN IKE authentication.
– Support DDNS update periodically.
Issues Resolved:
– After rebooting or upgrading the device, schedule-based firewall access rules do not work. (CSCuo66872)
– If users enable QoS, configure the Ethernet upstream and downstream rate limit, and then create or delete a new VLAN, the downstream rate limit does not work. (CSCuo94504)
– Sometimes, after Ethernet WAN, or 3G interface failover, LAN hosts are unable to access the Internet. (CSCuo64951)
– Wireless clients may not be able to access the Internet when roaming between the device and another access point on the LAN side. (CSCum42666)
– OpenSSL upgrade. (CSCuo18651)
– Changing default LAN IP should be optional when VPN server is enabled. (CSCul19364)
– DNS proxy doesn’t always work. (CSCuo97062)
– DNS configuration was lost when configuring WAN in setup wizard. (CSCuo85131)
– Static DHP will only recognize ~44 entires. (CSCus89995)
– Changing default in LAN IP should be optional when VPN server is enabled. (CSCul19364)
Procedimiento de instalación:
– Guarde el paquete descargable.
– Inicie sesión en la interfaz de usuario web del enrutador.
– Navegue a la sección de actualización de firmware de su unidad inalámbrica.
– Seleccione el firmware actual y configure su enrutador para instalar este archivo.
– Espere a que el dispositivo realice este proceso.
– Reinicie la unidad si es necesario.
Descargar