Bushnell Trophy Cam 119455c Camera Firmware BS680CFNx02020
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: 119455US.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Este paquete proporciona los archivos de instalación necesarios de Bushnell Trophy Cam 119455c Camera Firmware BS680CFNx02020.
Nota:
– This is the US Model of Bushnell Trophy Cam 119455 camera
Pasos de instalación:
1. Save downloaded files to a blank SD Card (16GB card or smaller – 8GB or smaller on 119425/119425C). Make certain that the software update corresponds to the model that you wish to update. If you install this update to a x01 camera or you don’t match the software to the model number, you could erase your camera memory permanently.
2. Put 8 New batteries into Trophy Cam (WARNING—THIS IS A CRITICAL STEP. IF POWER IS INTERUPTED DURING UPDATE, THE CAMERA MEMORY MAY BE PERMANENTLY ERASED.)
3. Insert SD card into unit.
4. While pressing and holding the UP/VIDEO button, switch unit to SETUP. (Note the camera will appear as if it is NOT turned on. The screen will not power up during this step.)
5. Continue to hold UP/VIDEO button for 20 seconds.
6. After 20 seconds release button and leave camera in SETUP mode for 2 minutes (updating)
7. After 2 minutes, switch camera to OFF.
Descargar