Alcorn LightCue-E Console Firmware 1.21
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: LightCue_OS.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Correcciones:
– Corrected issue with traffic sent to UDP port 0
Installation Instructions
1. Copy OS.NEW to the Compact Flash card. (Rename to OS.nEW if needed)
2. Reset unit by turning it off, and then on again.
3. Wait for Update to complete. You will see “Firmware Update Complete!” on the screen when finished.
Nota:
You can alternatively use the menu in Winscript under Help–>Update Firmware to download and update the firmware.
NOTE:
When the update is complete, the OS.NEW file will be renamed to OS.SAV so that the update does not
repeat when the hardware is powered-up again. If you want to use a single flash card to update multiple units (for example, an entire Binloop cage), you can change the name of the OS.NEW file to FACTORY.NEW. The FACTORY.NEW file will perform an update just like OS.NEW, only it will not be renamed at the end of the update process. This means that after an update, you can remove the flash card from the product and insert it into another product to perform another update.
NOTE: Updating the firmware may cause the LightCuePro to reset to it’s factory default network settings. Make sure that you remember or write down these settings before updating your LightCuePro. (IP Address, username, password, etc)
Descargar