Alcorn DVM-8500 Digital Video Machine Firmware 1.18
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: dvm8500_reprohd2_v118.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Release Notes
– Rare unit lock up fixed from ethernet activity
– Added controller card polling support for current clip name caching
Installation Instructions
1. Copy OS.NEW to the Compact Flash card.
2. Reset unit by turning it off, and then on again.
3. Wait for Update to complete. You will see the status LED turn ORANGE, and then turn off.
4. For the DVM8500, the firmware version will be displayed on the LCD during powerup. It can also be read via Ethernet or RS-232 using the Version Request (?V) command.
5. For the ReproHD, the firmware version can be read using the reproducer version request in the Binloop Config software.
NOTE: When the update is complete, the OS.NEW file will be renamed to OS.SAV so that the update does not repeat when the hardware is powered-up again. If you want to use a single flash card to update multiple units (for example, an entire Binloop cage), you can change the name of the OS.NEW file to FACTORY.NEW. The FACTORY.NEW file will perform an update just like OS.NEW, only it will not be renamed at the end of the update process. This means that after an update, you can remove the flash card from the product and insert it into another product to perform another update. This method will allow you to update an entire Binloop cage using a single card, without powering down the cage.
NOTA:
– A/V Binloop HD Reproducer REPROHD2
– Digital Video Machine HD DVM8500
– SetPlayer – SP1000
Descargar