Alcorn DVM-7400 Video Player Firmware 1.86
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: dvm7400v186.zip.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
Release Notes
– Corrected clock gen for 96kHz audio
Installation Instructions
1. Copy OS.NEW to the Compact Flash card.
2. Reset unit by turning it off, and then on again.
3. Wait for Update to complete. You will see the following LED sequence:
VERIFY FILE – Solid GREEN LED
ERASING FLASH – Solid RED LED
PROGRAMMING FLASH – Solid ORANGE LED
4. Sending a ?V<CR> command to the unit will return the current software version.
NOTE: When the update is complete, the OS.NEW file will be renamed to OS.SAV so that the update does not repeat when the hardware is powered-up again. If you want to use a single flash card to update multiple units, you can change the name of the OS.NEW file to FACTORY.NEW. The FACTORY.NEW file will perform an update just like OS.NEW, only it will not be renamed at the end of the update process. This means that after an update, you can remove the flash card from the product and insert it into another DVM-7400 to perform another update.
NOTE: Updating the firmware may cause the DVM-7400 to reset to its factory default settings. Make sure that you remember or write down these settings before updating your DVM-7400. (IP Address, Colorspace, password, etc.)
Descargar