Tomato USB Router Firmware NDUSB-1.28.8754-Lite
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: tomato-NDUSB-1.28.8754-Lite.rar.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
Tomato USB is an alternative Linux-based firmware for powering Broadcom-based ethernet routers. It is a modification of the famous Tomato firmware, with additional built-in support for USB port, wireless-N mode support, support for several newer router models, and various enhancements.
Build 54:
Hotfix release for regressions/bugs introduced in previous build 53:
– Fixed: router may not be able to obtain WAN IP from DHCP after NVRAM erase.
– Fixed: unable to access router Web GUI via HTTPS after upgrade if SSL certificate has been previously saved to NVRAM.
– Fixed: firmware upgrades via HTTPS not working with some browsers.
– Fixed: some Web GUI validation rules on Basic->Network page not working properly.
– Fixed: Basic->Network and some other Web GUI pages show up empty if SSID contains a “single quote” character.
– Cosmetics.
The Tomato USB comes in several different editions:
– Standard:
most basic features; ~300KB JFFS space (5 blocks) available on 4MB flash routers;
– Extras:
all features of Standard plus built-in NTFS support (starting from build 36), included Linux Ext2/Ext3 and FAT32 filesystem utilities (fdisk, e2fsck, mke2fs, mkswap, mkdosfs), built-in loop device support, some extra Linux commands not included in other builds, and additional color schemes. ~120KB JFFS space (2 blocks) available on 4MB flash. This version is for people who don’t really need JFFS space, or have 8+ MB flash routers, and would like to be able to partition/format drives in Linux native Ext2/Ext3 format or in FAT32 format directly on the router without installing any additional tools.
– Lite:
all features of Standard but no Samba; some very minor features are stripped out of Busybox, about 600KB JFFS space (10 blocks) available on 4MB flash routers;
– No CIFS:
all features of Standard but no CIFS Network filesystem support, about 420KB JFFS space (7 blocks) available on 4MB flash routers;
– VPN:
Extras edition merged with SgtPepperKSU’ VPN build with Web GUI (no JFFS space left on 4MB flash).
– No USB:
Initially this was the USB mod… However, it grew up to be an “extended” version of Tomato even without USB support, so starting from build 36 Tomato USB includes non-USB edition (ND only) for routers with no USB ports. This build has about 900KB of JFFS space (15 blocks) available on 4MB flash routers.
HINWEIS:
– Kernel 2.6 (experimental) for MIPSR2 Routers
Warnung:
This firmware is provided as-is without any warranty. We will NOT be responsible for any damages that may occur due to the use of this firmware. USE IT AT YOUR OWN RISK!
Download