Thecus N2810 NAS Server Firmware 3.02.00.2
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: Thecus_x86_64_FW.3.02.00.2.k401.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
New Features/Changes:
– New Tornado user interface.
– Fixed CEV-2017-7494.
Upgrade firmware:
– Save the downloadable file on your computer.
– Login as admin from web interface to your Thecus NAS with 64bit firmware.
– In the [System Management] menu, choose the [Firmware upgrade] item and the firmware upgrade.
– Press button and select the firmware you downloaded.
– Press [Apply] and the confirm window will pop up. Please select [Next] button twice to confirm the process, and start firmware upgrade. The entire upgrade takes about 3 minutes. After the firmware is upgraded, Thecus NAS will beep for 3 seconds.
– HINWEIS: If your browser is set to cache the screen, please press CTRL-F5 in your browser to reload from server instead of from browser’s cache.
– During firmware upgrade process, you will see a progress bar indicating the completeness.
– HINWEIS: During firmware upgrade process, it is imperative that user do not turn off the power to Thecus NAS or close the browser. This will lead to catastrophic result.
– Just in case, the upgrade process failed, please DO NOT restart or shutdown the NAS. Go back and upgrade the firmware again.
– After the firmware is upgraded, you will see a message ask admin user to reboot. Please reboot to finish the upgrade process.
– After click [Reboot], the system will redirect to [Shutdown / Reboot] page, you may select the NAS to shutdown or reboot.
– HINWEIS: After reboot the Thecus NAS, please go to [System Management > Config Mgmt] to save your configuration. New version of firmware will not work with configuration file from previous versions of firmware.
Download