Ricoh Pentax K-1 Mark II Camera Firmware 1.04
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: k1II_v104.zip.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
Änderungen:
– Corrected – Unstable performance may rarely occur in Movie mode or Live View status of still picture in firmware version 1.42.
Updating Procedure:
– Provide a formatted SD memory card for the update software.
– The download file is self-extracting.
– Copy the Firmware file to the root directory in the SD card.
– If your computer does not have a card slot, you can copy the firmware update file by inserting the SD card into your camera and then connecting the camera directly to your computer.
– Insert the battery into the camera and confirm the battery is full by battery level indicator then turn the camera off.
– Insert the update SD card into SD1 slot of the camera and close card cover.
– Turn the camera power on while pressing the MENU button.
– “Updates the camera firmware” will be displayed in the LCD monitor
– Current version and update version will be displayed.
– Press the four-way controller to select “Start” and press the “OK” button.
– “NOW LOADING” appears on the LCD monitor and updating starts.
– Please do not under any circumstances switch off the power before the update is completed.
– It will take approximately 90~150 seconds to complete update.
– When update is completed, the “COMPLETE” will be displayed on the LCD monitor, then turn the camera off.
– Remove the update SD card from the camera.
Download