Planet WNAP-W2201A Access Point Firmware 1.3456cb151228
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: FW_WNAP-W2201A_v1.3456cb151228.zip.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
HINWEIS:
1. This firmware is only for the WNAP-W2201A. A different firmware cannot be used for a different version. Thus, the WNAP-W2201A’s firmware only can be used in the corresponding models.
2. If any default value has been changed/customized in new firmware version, user must upload the “config-xxx.dat” (xxx is the number to be filled out) file to apply the new settings after finishing firmware upgrade.
Upgrade Method
1. To upgrade the firmware of your AP, please logon to the machine and click on the “Management” menu.
2. Then, choose “Upgrade Firmware”.
3. On this page, you can use the Browse button to allocate the firmware bin file (e.g. FW_WNAP-W2201A_V1.3465xxxxxx.bin) on your PC.
4. Once the new firmware file is selected, click the “Upload” button to start the upgrade process.
5. After the upgrade is completed, please navigate to “Reload Settings” page and then click the “Browse…” button.
6. Select the “Config_WNAP-W2201A_V1.3465xxxxxx.dat” file and click the “Upload” button to load the customized settings.
7. After it is done, please reset the AP to default setting and re-configure your AP. (Management-> Reload Settings-> Reset Settings to Default)
Download