Pelco Sarix IXP31 IP Camera Firmware 3.29.59
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: IXP31 Firmware v3.29.59.zip.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
Improvements and Features
– You can now require users to log in before viewing video through the camera’s web interface by enabling the Password required for live view option from the Users/General page within the Web interface.
Major Fixes
– Corrected an issue causing IMP cameras on an Endura system with a NSM5200 to stop recording.
– Corrected an issue to change the default login webpage and require password authentication to view thelive image on the web interface.
– Corrected an issue with ONVIF G playback that caused playback to always play at 1 FPS, rather than the expected FPS for the stream.
– Corrected an issue with ONVIF that caused the white balance values to not adjust as expected when modifying the white balance settings.
– Corrected an issue causing the IP address to become the factory default after turning the power off and on
UPGRADING FIRMWARE FROM CAMERA WEB INTERFACE:
1. Use Internet Explorer to access the camera via its IP address.
2. Click on the Login link in the upper right corner of the page and then enter credentials for the administrator.
3. Click Settings and then navigate to the Firmware page under the System menu.
4. Click Browse to select the firmware file and then click Upload.
The camera will install the updated firmware and then restart. The firmware update process typically takes up to 5 minutes to complete.
Download