Panasonic DC-S1R Camera Firmware 1.3
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: S1R__V13.zip.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
Expanded media compatibility
– CFexpress Type B memory card can be used.
Expanded compatibility with Profoto wireless transmitters
– Profoto wireless transmitters “Air Remote TTL-O/P” and “Profoto Connect-O/P” can be used.
– All functions may not be available depending on the situation.
Improved compatibility with Sigma interchangeable lenses and mount converter
– It is possible to assign function to the Fn buttons of Sigma L-Mount interchangeable lenses.
– When attaching a lens using the Sigma MC-21 mount converter and [Image Stabiizer] > [Lens] is set to ON , Body I.S.(Image Stabilizer) suppresses roll movement.
Improved compatibility with Panasonic interchangeable lenses
– It is possible to assign functions to the lens’ Fn buttons when the Panasonic LUMIX S PRO 70-200mm F2.8 O.I.S. (S-E70200) is mounted.
Improved AF performance
– It is possible to set [AF+MF] in AFC mode.
– It is possible to set continuous AF on the live view screen in Creative Video mode or in other video recording mode when the video recording area is displayed.
Improved performance of High Speed Video
– It is possible to manually set the exposure according to the video exposure mode (P/A/S/M) in High Speed Video mode.
Other added functions
– It is possible to select the card slot to save the JPEG images developed by in-camera RAW processing.
– [0.5 SEC] has been added for an option of [Duration Time (photo)] in [Auto Review].
– [Forced Flash OFF] can be selected in iA mode.
– [AF Assist Light] has been added to the Focus tab of the [Video] menu.
– [Off (Disable Press and Hold)] can be assigned to the Fn button. It disables operation when the button is long-pressed.
– Fn button can be used for checking aperture effect while the button is pressed.
Other improvements
– There were cases where F value control failed depending on the maximum F value when non-Panasonic L-Mount lens is mounted. This bug has been fixed.
– Luminance level of photos (including 6K/4K Photo and Post Focus images) can be set when playing back them over HDMI output.
– AE can be locked with the [AF/AE LOCK] button when ISO Auto is set in M mode.
– Image quality of long exposure shot has been improved. (When [Long Exposure NR] is set to OFF and [Vignetting Comp.] is set to ON.)
– Aperture and shutter speed can be controlled using front/rear dials when the rear monitor is set to OFF.
Improved operational stability
– There were cases where Backup Recording using the Double Card Slot Function stopped during writing. This bug has been fixed.
– AF operation following the pressing of [AF-ON] in MF mode was unstable when the LVF Frame Rate was at 120 fps and the camera was under dim lighting. This bug has been fixed.
– There were cases where the images shot vertically did not rotate on playback. This bug has been fixed.
– There were cases where [Image Stabilizer] was set to OFF when the battery was reinserted. This bug has been fixed.
– Operational stability of image stabilizer has been improved. (When [Image Stabilizer] > [E-Stabilization(Video)] and [Boost I.S.(Video)] is ON. )
Firmware Update Procedures:
STEP 1. Check the current version of firmware used by your camera.
STEP 2. Download an updated version of the firmware and double click the downloaded file to decompress it.
STEP 3. Copy the firmware file onto an SD Memory Card.
STEP 4. Install the firmware update.
Caution:
– Please do not turn off your camera, or do not remove the SD Memory Card while updating your camera’s firmware.
– Doing so can cause serious damage to your camera.
– If the camera malfunctions after the firmware updating, please contact the dealer where you purchased the camera or the Global Service Center Network.
Download