Nikon Z 7 Camera Firmware 3.00
Dateityp: Firmware.
Betriebssystem: Windows 10, Windows 7, Windows 8, Windows 8.1.
Dateiname: F-Z7-V300W.exe.
Bit: 64 Bit.
Lizenz: Kostenlos.
Beschreibung
Änderungen:
– Added support for ProGrade and Lexar CFexpress memory cards (Type B). For more information, see the Nikon website for your country or region.
– Custom Setting a4 (Auto-area AF face/eye detection) now offers an Animal detection option that adds dogs and cats to the subjects supported by face- and eye-detection autofocus. As a result, the camera can now detect and focus on the faces and eyes of dogs and cats. Animal face detection (but not eye detection) is also available in movie mode.
– Custom Setting f2 (Custom control assignment) in Group f (Controls) of the CUSTOM SETTING MENU now offers a Lens Fn2 button option, which can be used to choose the role played by the L-Fn2 button available on certain Z mount lenses (as of February 12, 2020, only the NIKKOR Z 70–200mm f/2.8 VR S).
– Added support for the focus limit switch available on certain Z mount lenses (as of February 12, 2020, only the NIKKOR Z 70–200mm f/2.8 VR S).
– Optimized the responsiveness of the switch to manual focus when the focus or control ring on a Z mount lens is rotated during autofocus. Note that the control ring only functions in this capacity when assigned the Focus (M/A) role.
Improved the functionality of subject-tracking AF (available when Auto-area AF is selected for AF-area mode) as follows:
– Subject-tracking AF can now be initiated via the Fn1 or Fn2 button on the camera or the Fn1 or Fn2 button on the lens. Subject-tracking AF must first be assigned to the control using Custom Setting f2 (Custom control assignment) in Group f (Controls) of the CUSTOM SETTING MENU or Custom Setting g2 (Custom control assignment).
– The behavior of the camera when tracking is end by pressing the AF-ON button or by pressing the shutter-release button halfway with AF-C (continuous-servo autofocus) and subject-tracking AF enabled in photo mode has been changed to more closely resemble that of the 3D-tracking option for digital SLR cameras.
Die folgenden Probleme wurden behoben:
– When Viewfinder brightness was adjusted manually, brightness would sometimes change when the standby timer was restarted.
– iOS devices running iOS 13 would sometimes display a Bluetooth pairing request when pairing was complete.
– Horizontal lines would sometimes appear in photographs.
Hinweis:
– For information on the license for the open-source software included in the camera’s NVM Express driver, see “BSD License (NVM Express Driver)”.
Anzeigen der Firmware-Version der Kamera:
– Schalten Sie die Kamera ein.
– Drücken Sie die MENU-Taste der Kamera und wählen Sie Firmware-Version im SETUP-MENÜ, um die Firmware-Version der Kamera anzuzeigen.
– Überprüfen Sie die Firmware-Version der Kamera.
– Schalten Sie die Kamera aus.
Aktualisieren der Kamera-Firmware:
– Erstellen Sie einen Ordner auf der Festplatte des Computers und benennen Sie ihn wie gewünscht.
– Download the file to the folder newly-created.
– Extract the file to a folder named “Z7Update”
– Using a card slot or card reader, copy the .bin to a memory card that has been formatted in the camera.
– Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
– Insert the memory card into the camera and turn the camera on.
– Wählen Sie Firmware-Version im SETUP-MENÜ und befolgen Sie die Anweisungen auf dem Bildschirm, um das Firmware-Update abzuschließen.
– Wenn das Update abgeschlossen ist, schalten Sie die Kamera aus und entfernen Sie die Speicherkarte.
– Vergewissern Sie sich, dass die Firmware auf die neue Version aktualisiert wurde.
Download