Nikon D5500 Camera Firmware 1.02
Dateityp: Firmware.
Betriebssystem: Windows 10, Windows 7, Windows 8, Windows 8.1, Windows Vista.
Dateiname: F-D5500-V102W.exe.
Bit: 64 Bit.
Lizenz: Kostenlos.
Beschreibung
Änderungen:
– The camera would stop responding if the multi selector was pressed right with Add items > CUSTOM SETTING MENU > c Timers/AE lock selected in MY MENU.
– The shutter would sometimes not be released in response to live view touch shutter controls if autofocus was used with an SB-800 flash unit attached.
– Optimal exposure would sometimes not be achieved in photographs taken during live view with lenses that support both autofocus and electronic aperture control (type E lenses).
– If image review was enabled during viewfinder photography, the camera would sometimes display shooting information in place of the most recent picture when the user removed their eye from the viewfinder after shooting.
– The camera would sometimes fail to store the option selected for a Autofocus > a3 Built-in AF-assist illuminator in the CUSTOM SETTING MENU after the mode dial was rotated to another setting.
Hinweis:
– Once this firmware is installed, the Windows edition of Camera Control Pro 2 versions 2.22.0 and earlier will no longer be able to detect the camera. Upgrade to Camera Control Pro 2.23.0 or later.
The following issues have been addressed:
– Noise would occur at four-second intervals in audio output to external recorders connected via HDMI in movie live view.
– Choosing negative values for Exposure compensation in the RETOUCH MENU > NEF (RAW) processing display did not have the desired effect.
– Selecting ON for Exposure smoothing during interval timer photography would result in all shots after the first being overexposed.
Anzeigen der Firmware-Version der Kamera:
– Schalten Sie die Kamera ein.
– Drücken Sie die MENU-Taste der Kamera und wählen Sie Firmware-Version im SETUP-MENÜ, um die Firmware-Version der Kamera anzuzeigen.
– Überprüfen Sie die Firmware-Version der Kamera.
– Schalten Sie die Kamera aus.
Aktualisieren der Kamera-Firmware:
– Erstellen Sie einen Ordner auf der Festplatte des Computers und benennen Sie ihn wie gewünscht.
– Laden Sie die Firmware herunter file to the folder created.
– Run it to extract the firmware file.
– Using a card slot or card reader, copy the .bin file to a memory card that has been formatted in the camera.
– Insert the memory card into the camera memory card slot and turn the camera on.
– Wählen Sie Firmware-Version im SETUP-MENÜ und befolgen Sie die Anweisungen auf dem Bildschirm, um das Firmware-Update abzuschließen.
– Wenn das Update abgeschlossen ist, schalten Sie die Kamera aus und entfernen Sie die Speicherkarte.
– Vergewissern Sie sich, dass die Firmware auf die neue Version aktualisiert wurde.
Download