Nikon D4S Camera Firmware C:1.32
Dateityp: Firmware.
Betriebssystem: Windows 10, Windows 7, Windows 8, Windows 8.1, Windows Vista.
Dateiname: F-D4S-V132W.exe.
Bit: 64 Bit.
Lizenz: Kostenlos.
Beschreibung
Änderungen:
Fixed the following issues, which would in rare cases occur when RAW+JPEG photographs were taken with write-enabled cards inserted in both the XQD and CompactFlash card slots, RAW primary – JPEG secondary selected for Secondary slot function in the SHOOTING MENU, and On selected for Network > Options > Auto send in the SETUP MENU:
– The camera would sometimes freeze or restart after users had pressed the shutter-release button all the way down without first activating the standby timer and then allowed the timer to expire or turned the camera off without first reactivating the timer.
– If the shutter-release button was pressed all the way down to begin shooting with the standby timer off, the first shot would sometimes neither be marked for transfer nor uploaded.
Viewing the Camera Firmware Version
– Schalten Sie die Kamera ein.
– Drücken Sie die MENU-Taste der Kamera und wählen Sie Firmware-Version im SETUP-MENÜ, um die Firmware-Version der Kamera anzuzeigen.
– Überprüfen Sie die Firmware-Version der Kamera.
– Schalten Sie die Kamera aus.
Updating the Camera Firmware
– Download and run the file.
– Using a card slot or card reader, copy the .bin to a memory card that has been formatted in the camera.
– Insert the memory card into the primary slot on the camera and turn the camera on.
– Select Network in the SETUP MENU and confirm that Disable is selected for Network connection.
– Wählen Sie Firmware-Version im SETUP-MENÜ und befolgen Sie die Anweisungen auf dem Bildschirm, um das Firmware-Update abzuschließen.
– Wenn das Update abgeschlossen ist, schalten Sie die Kamera aus und entfernen Sie die Speicherkarte.
– Vergewissern Sie sich, dass die Firmware auf die neue Version aktualisiert wurde.
Download