Nikon COOLPIX S2800 Camera Firmware 1.2
Dateityp: Firmware.
Betriebssystem: Windows 10, Windows 7, Windows 8, Windows 8.1, Windows Vista.
Dateiname: F-S2800-V12W.exe.
Bit: 64 Bit.
Lizenz: Kostenlos.
Beschreibung
Fixes:
– Fixed an issue in which the power lamp would light when the power switch was pressed but the lens would not extend, nor would the camera start up normally.
How to verify your camera’s current firmware version:
– Schalten Sie die Kamera ein.
– Press the MENU button to display the menu screen.
– Press the rotary multi selector to the left to highlight the menu tab, select the setup tab, and press the OK button.
– Highlight Firmware version from the setup menu and press the OK button.
– Die Firmware-Version der Kamera wird angezeigt.
– Schalten Sie die Kamera aus.
Quick Install Guide:
– Power the camera from AC adapter unit or use a fully charged battery.
– Create a new folder with an appropriate name on your computer’s hard drive.
– Download the file from the available links.
– Run the downloaded file to create a folder which contains the firmware folder.
– Use a card reader or similar device to copy the firmware folder to the root directory of a memory card formatted in the camera.
– Backup any data saved to the camera’s internal memory.
– Insert the memory card into the camera’s memory card slot and turn on the camera.
– Select Firmware version from the camera’s setup menu and follow instructions displayed to upgrade the firmware.
– After the update is complete, turn off the camera and remove the memory card.
– Access the Firmware version item in the camera’s setup menu to confirm that the firmware has been upgraded.
– Format the camera’s internal memory by selecting Format memory from the setup menu, and then turn off the camera.
Download