MSI 880G-E45 ATI RAID Preinstall Treiber 3.2.1540.24/35 für XP/Vista
Dateityp: Treiber.
Betriebssystem: Windows Vista, Windows XP.
Dateiname: ATI_SB8xx_RAID_mb.zip.
Bit: 64 Bit.
Lizenz: Kostenlos.
Beschreibung
CPU
• 64bit AMD Phenom II X6/X4/X3/X2, Athlon II X4/X3/X2 and Sempron CPU.
Please refer to CPU Unterstützung für compatible CPU; the above description is for reference only.
Hyper Transport Bus
• HyperTransport 3.0 supporting speed up to 5200MT/s
Chipset
• AMD 880G and SB710 Chipset
Main Memory
• Supports four unbuffered DIMM of 1.5 Volt DDR3 800/1066/1333/1600* (OC) DRAM, 16GB Max
Slots
• 1 PCI Express x16 slot with x16 operation (PCI Express Bus SPEC V2.0 compliant)
• 3 PCI EXpress x1 slots
• 2 PCI slots, support 3.3V/ 5V PCI bus Interface.
On-Board IDE
• One IDE port by AMD SB710
– Supports Ultra DMA 66/100/133 mode
– Supports PIO, Bus Master operation mode
– Can connect up to two IDE devices
On-Board SATA
• 5 SATA II (1~5) ports by AMD SB710
• 1 eSATA port by AMD SB710
– Supports storage and data transfers at up to 3Gb/s
RAID Function
– SATA II 1~5 support RAID 0, 1, 10, JBOD mode by AMD SB710
MSI Reminds You…
• The RAID setup floppy disk is optional depending on the districts. You can download the files from the website to make the setup disk.
Audio
• Chipset integrated by Realtek ALC888S/ACL889
– Flexible 8-channel audio with jack sensing
– Compliant with Azalia 1.0 Spec
LAN
• Realtek PCI-E GbLAN controller RTL8111DL
– Supports 10Mb/s, 100Mb/s and 1000Mb/s
– Compliance with PCI-Express Bus specification v1.0a
IEEE1394 / FireWire
• Chipset integrated by VIA VT6315N
– Transfer rate is up to 400Mbps
Internal I/O Connectors
– 1 x ATX 24-pin power connector
– 1 x ATX 4-pin 12V CPU power connector
– CPU x 1 / System x 3 FAN connectors
– 1 x Front panel audio connector
– 1 x Front panel connector
– 1 x Chassis intrusion switch connector
– 3 x USB 2.0 connectors
– 5 x Serial ATA II connectors
– 1 x IEEE1394 port
– 1 x ATA133 HD connector
– 1 x Serial port connector
– 1 x OC Switch
– 1 x Power LED button
– 1 x Reset LED button
– 1 x Clear CMOS button
– 1 x SPDIF-out connector
– 1 x TPM module connector
Back Panel I/O Ports
– 1 x PS/2 keyboard or mouse
– 1 x 6 in 1 audio jack
– 6 x USB 2.0 ports
– 1 x RJ45 LAN jack
– 1 x optical SPDIF-out port
– 1 x eSATA port
– 1 x DVI-D port
– 1 x Graphic Card port
– 1 x HDMI port
– 1 x IEEE1394 port
Dimension
• 30.5cm(L) x 24.4cm(W) ATX Form Factor
Es wird dringend empfohlen, immer die neueste verfügbare Treiberversion zu verwenden.
Vergessen Sie nicht, so oft wie möglich auf unserer Website nachzuschlagen, um über die neuesten Treiber, Software und Spiele auf dem Laufenden zu bleiben.
Versuchen Sie, einen Systemwiederherstellungspunkt festzulegen, bevor Sie einen Gerätetreiber installieren. Dies hilft, wenn Sie einen falschen Treiber installiert haben. Probleme können auftreten, wenn Ihr Hardwaregerät zu alt ist oder nicht mehr unterstützt wird.
Download