Mellanox MHRH29C-XSR rev.A1 Adapter Card Firmware 2.9.1000
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: fw-ConnectX2-rel-2_9_1000-MHRH29C_A1-A3.bin.zip.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
Added support for the following features:
– New steering mechanism according to Ethertype and Vlan
– Header separation
– IPoIB ETHoIB offloads
– PCI Function Level Reset
– MPI performance enhancement: 97601 enigma bit
– Added INI to enable new LED behavior: dual_color_led_mode_en
– SRIOV beta support for ConnectX-2. To enable it, set sriov_en to TRUE in the INI
– Thermal sensing MAD
Bug Fixes:
– Issues with the IPoIB checksum offload Fixed 2.8.0600 2.9.1000
– PCIe Select de-emphasis was not functional in a specific environment (ID 85719)
– The wrong event type was displayed in the thermal warning event for drivers that did not support the event
– Wrong UAR mapping in pages larger than 4K: MSI-X and Blueflame did not work on UAR pages larger than 4K
– Mellanox adapters card MHGH29B, may enter a false thermal shutdown state upon driver unload
– 40GbE Link may not be established after driver restart Fixed 2.8.0600 2.9.1000
– Congestion Notification Packet may cause HCA to stall under extreme conditions
– Enforced correct IP identification field in transmitted IPoIB/EoIB packets
– Advanced Error Reporting fixes (ID 100570) Fixed 2.8.0600 2.9.1000
– Performance improvement for single port cards (ID 106144)
– When in unsolicited mode a completion message is not sent on every completion
– QUERY_IF_STAT – Fixed clear number of packets (ID 101245)
– RDMA read message rate improvement (ID 97406) Fixed 2.8.0600 2.9.1000
– If no EEPROM is present in the module/cable or if the identifier field in EEPROM is not set correctly, the link raises only 10G XFI (ID 102651)
Download