Mellanox MCX556M-ECAT-S25 VPI Card Firmware 16.23.1020
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: fw-ConnectX5-rel-16_23_1020-MCX556M-ECA_Ax-UEFI-14.16.17-FlexBoot-3.5.504.bin.zip.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
Änderungen:
– RoCE DC: Added support for Dynamically Connected Transport (DC) in RoCE in ConnectX-5 adapter cards.
– Mini-CQE Compression: Enabled Rx mini-CQE compressed format for striding RQ.
– TX Steering Rules: Enabled TX steering rule on the application meta-data from the WQE. This functionality implements meta-data Reg A steering and meta-data Reg A and Reg B rewriting.
– Tunneling Offload/steering Match Criteria: Added MPLS over UDP and MPLS over GRE protocols for tunneling offload/steering match criteria.
– InfiniBand: Added support for IPoIB non-default Partition Keys (PKeys). Now the PKey values can be modified in the PKey table without the need of recreating the IPoIB (underlay) QPs.
– SR-IOV in Multi-Host/Socket-Direct: [Beta] Added support for SR-IOV in Multi-Host/Socket-Direct.
– Virtualization: Reduced firmware’s memory consumption to increase the supported number of VFs per PF to up to 100.
– Tools/Driver Version: Added support for QUERY_DRIVER_VERSION command. This command allows the PF driver to query its VFs driver version which was set by the SET_DRIVER_VERSION command.
– Resiliency: Shutting Down RDMA QPs with Excessive Retransmissions is a mechanism used to detect excessive retransmissions for an RC connection, and to close the connection in response to it. If the number of retransmissions due to a Local Ack Timeout, NAK-Sequence Error, or Implied NAK, during a specified period, exceeds the specified threshold, the QP will be handled as if the IB spec defined Retry Count was exceeded.
– Diagnostic Counters: Added new diagnostic counters to evaluate the number of ICMC hits and misses for particular resources.
Bug Fixes:
– Closed the vport as part of the fast teardown flow, to prevent Ack to be sent without been scatter to memory.
– Fixed an issue that occasionally caused the link to drop after running the ‘reboot’ command due to I2C being stuck.
– Fixed an issue that caused the tx_pause_storm_warning_events and the tx_pause_storm_error_events counters to increase even when there was TX pause.
– Fixed an issue related to the QoSConfig MADs that occasionally caused the firmware to issue an assert under certain device configurations.
– Fixed an issue where on high loaded Power9 systems with On-Demand-Paging (ODP) enabled, QP might have entered an error state in case the retry counter was exceeded during page fault recovery. As a result, if the page was fetched after QP has already been closed, page_- fault_resume error message would appear.
– Fixed an issue that resulted in a wrong sensor state report when running the PLDM sensor reading command and when a negative temperature was set with the hook.
– Fixed a speed issue for link mode Speed25GBaseSR.
– Pause duration: Physical port counters count in 512bits quantas, instead of microseconds.
Download