Gigabyte Z390 D (rev. 1.0) Intel Serial IO Treiber 30.100.2020.7 für Windows 10 64-bit
Dateityp: Treiber.
Betriebssystem: Windows 10.
Dateiname: mb_driver_614_serialio_30.100.2020.7.zip.
Bit: 64 Bit.
Lizenz: Kostenlos.
Beschreibung
Hauptmerkmale:
– Supports 9th and 8th Gen Intel Core Processors
– Dual Channel Non-ECC Unbuffered DDR4
– Advanced Thermal Design
– NVMe PCIe Gen3 x4 22110 M.2 Connector
– Multi-Way Graphics Support
– GIGABYTE Exclusive 8118 Gaming LAN with Bandwidth Management
– Ultra Durable 25KV ESD and 15KV Surge LAN Protection
– Support RGB Light Strip in Full Colors
– CEC 2019 Ready, Save the Power as Easy as One Click
– Smart Fan 5 features Multiple Temperature Sensors and Hybrid Fan Headers with FAN STOP
– Lightning-Fast Intel Thunderbolt 3 AIC Support
– Intel Optane Memory Ready
Dieses Paket enthält die Dateien, die zur Installation des Treibers Intel Serial IO benötigt werden. Wenn es installiert wurde, können durch Aktualisieren (Überschreiben) Probleme behoben, neue Funktionen hinzugefügt oder vorhandene erweitert werden. Auch wenn andere Betriebssysteme möglicherweise ebenfalls kompatibel sind, empfehlen wir, diese Version nicht auf anderen als den angegebenen Plattformen anzuwenden.
Driver Installation via Installer:
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Locate the “SetupSerialIO.exe” file.
– Right click on the executable and select ‘Run as administrator’ option from the menu to start the installer and then click on ‘Yes’ button in User Account Control pop-up window.
– You should see welcome screen with component details. Click ‘Next >’ button to continue the installation.
– Next, you should see license agreement screen. Please review the license agreement and if you accept the license terms then check the check-box on “I accept the terms in the license Agreement” and click on the “Next >” button to continue the installation.
– Next, you can select the folder location where the driver will be installed. By default, the driver will be installed in c:program FilesIntelIntel Serial IO. Click on “Next >” button to continue installation.
– Next, a list of driver components that will be installed by the installer is displayed. Click on ‘Next >’ button to continue.
– After successful installation, you should see setup completion screen. Click on ‘Finish’ button to complete the installation.
Silent Driver Installation via Installer
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Open a Command Prompt (cmd.exe) with administrator rights (ie. Run as administrator). Click on ‘Yes’ button in User Account Control pop-up window.
– Change the directory to where you unzipped the driver in Step 1 and then change to the “Driver_Installer” directory.
– To see all available options for the Installer, run command “SetupSerialIO.exe -?”
– You should see a window pop-up. For the “-l <LCID>” option which specifies the language of the setup dialogs, the LCID list is shown in below table. Click OK to continue.
– Run command “SetupSerialIO.exe –b –s” to start the silent installation. (Where as x represents the particular version number.) This process should take about 1 min to complete. When silent installation is complete, the system will automatically reboot.
– After the system has booted, you can refer to section 0 to check the driver version.
Manual Installation via INF File:
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Locate the INF files. (iaLPSS_GPIO.inf, iaLPSS_I2C.inf, iaLPSS_SPI.inf, iaLPSS_UART2.inf)
– Right click on the INF file and select ‘Install’ option from the menu to start the installation and then click on ‘Yes’ button in pop-up window.
– After the installation of all the drivers, reboot the system.
Download