Gigabyte GA-970A-UD3 (rev. 1.2) Etron USB 3.0 Treiber 1.0.0.0115
Dateityp: Treiber.
Betriebssystem: Windows 7, Windows 8, Windows Vista, Windows XP.
Dateiname: motherboard_driver_etron_usb3.exe.
Bit: 64 Bit.
Lizenz: Kostenlos.
Beschreibung
Spezifikationen:
– CPU
AM3+ Socket:
Unterstützung für AMD AM3+ FX processors
Unterstützung für AMD AM3 Phenom II processors / AMD Athlon II processors
Hyper Transport Bus
4800 MT/s
– Chipset
North Bridge: AMD 970
South Bridge: AMD SB950
– Memory
4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
Dual channel memory architecture
Unterstützung für DDR3 2000(O.C.)/1866/1600/1333/1066 MHz memory modules
– Audio
VIA HD audio codec
High Definition Audio
2/4/5.1/7.1-channel
Unterstützung für S/PDIF Out
– LAN
1 x Realtek RTL8111E chip (10/100/1000 Mbit)
– Expansion Slots
1 x PCI Express x16 slot, running at x16 (PCIEX16)
1 x PCI Express x16 slot, running at x4 (PCIEX4)
3 x PCI Express x1 slots
(All PCI Express slots conform to the PCI Express 2.0 standard.)
2 x PCI slots
– Storage Interface
South Bridge:
6 x SATA 6Gb/s connectors supporting up to 6 SATA 6Gb/s devices
Unterstützung für RAID 0, RAID 1, RAID5, RAID 10 and JBOD
– USB
South Bridge:
Up to 14 USB 2.0/1.1 ports (8 ports on the back panel, 6 ports available through the internal USB headers)
2 x Etron EJ168 chips:
Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
– IEEE 1394
VIA VT6308 chip:
Up to 2 IEEE 1394a ports (1 port on the back panel, 1 port available through the internal IEEE 1394a header)
– Internal I/O Connectors
1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
6 x SATA 6Gb/s connectors
1 x CPU fan header
2 x system fan headers
1 x power fan header
1 x front panel header
1 x front panel audio header
1 x S/PDIF Out header
3 x USB 2.0/1.1 headers
1 x USB 3.0/2.0 header
1 x IEEE 1394a header
1 x Trusted Platform Module (TPM) header
1 x serial port header
1 x clearing CMOS jumper
– Back Panel Connectors
1 x PS/2 keyboard/mouse port
1 x optical S/PDIF Out connector
1 x IEEE 1394 port
8 x USB 2.0/1.1 ports
2 x USB 3.0/2.0 ports
1 x RJ-45 port
6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
– I/O Controller
iTE I/O Controller Chip
– H/W Monitoring
System voltage detection
CPU/System temperature detection
CPU/System/Power fan speed detection
CPU overheating warning
CPU/System/Power fan fail warning
CPU/System fan speed control
– BIOS
2 x 32 Mbit flash
Use of licensed AWARD BIOS
Unterstützung für DualBIOS
PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Download