Buffalo TS4400R NAS Firmware 2.90
Dateityp: Firmware.
Betriebssystem: Windows 10, Windows 7, Windows 8, Windows 8.1, Windows Server 2003, Windows Server 2008, Windows Server 2012, Windows Vista, Windows XP.
Dateiname: ts5000_4000-290en.zip.
Bit: 64 Bit.
Lizenz: Kostenlos.
Beschreibung
Added and Modified Features:
– Email Notifications: Modified so that the report categories and when the email will be sent are now configurable. The current settings will be taken over by the firmware update but we recommend verifying if the function works properly after the firmware update.
– Email Notifications: S.M.A.R.T information is now available to be sent via the notification email. It can be configured from “Advanced Report Settings”.
– SNMP: SNMP protocol now support S.M.A.R.T. for each drive on the TeraStation. Update the MIB file of your SNMP client.
Bug Fixes:
– Failover: Fixed a bug where the failover could not be canceled temporarily if the online update notice is present.
Before updating the firmware:
– Do not turn off the TeraStation until the firmware update is complete and the “finished” message is displayed.
– USB drives may not be mounted automatically after updating the firmware. To mount them, unplug and then reconnect them.
– Disconnect iSCSI volumes with the iSCSI Initiator before updating the firmware.
How to Update the Firmware:
– Connect the TeraStation and a computer to run the updater on the same network subnet. The subnet masks should be the same and the first three numbers of the IP addresses should be the same. The last number of the IP addresses should be different.
– Exit all applications. Also, stop or exit any firewall software.
– Extract the downloaded file and run “TSUpdater.exe”. When a TeraStation is detected, an update window will open.
– If multiple TeraStations are connected to the network, select which TeraStation to update.
– Click ‘Update’ and enter the TeraStation’s administrator password.
– Click ‘OK’.
– It will take several minutes for the firmware to update. During the update process, the info LED will blink. Don’t disconnect or power down the TeraStation until the update is finished.
– When the update is finished, a message will be displayed.
Download