ASUS VivoBook S15 S533FL Intel Serial IO SPI Treiber 30.100.1915.1 für Windows 10 64-bit
Dateityp: Treiber.
Betriebssystem: Windows 10.
Dateiname: SPI_DCH_Intel_Win10_64_V3010019151.zip.
Bit: 64 Bit.
Lizenz: Kostenlos.
Beschreibung
Hauptmerkmale:
– Processor: Intel Core i7-10510U or Core i5-10210U
– Graphics: NVIDIA GeForce MX250, 2GB GDDR5 VRAM
– Display: 15.6” LED-backlit Full HD (1920 x 1080) 16:9
– Memory: 8GB 2666MHz DDR4
– Storage: 256GB / 512GB / 1TB PCIe SSD
– Keyboard: Full-size backlit, with 1.4mm key travel
– Touchpad: Intelligent palm-rejection;
– Camera: HD Camera
– Wi-Fi: Intel Wi-Fi 6 with Gig+ performance (802.11ax), Intel Wi-Fi 5 (802.11ac)
– Bluetooth: Bluetooth V5.0
Dieses Paket enthält die Dateien, die zur Installation des Treibers Intel Serial IO benötigt werden. Wenn es installiert wurde, können durch Aktualisieren (Überschreiben) Probleme behoben, neue Funktionen hinzugefügt oder vorhandene erweitert werden. Auch wenn andere Betriebssysteme möglicherweise ebenfalls kompatibel sind, empfehlen wir, diese Version nicht auf anderen als den angegebenen Plattformen anzuwenden.
Driver Installation via Installer:
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Locate the “SetupSerialIO.exe” file.
– Right click on the executable and select ‘Run as administrator’ option from the menu to start the installer and then click on ‘Yes’ button in User Account Control pop-up window.
– You should see welcome screen with component details. Click ‘Next >’ button to continue the installation.
– Next, you should see license agreement screen. Please review the license agreement and if you accept the license terms then check the check-box on “I accept the terms in the license Agreement” and click on the “Next >” button to continue the installation.
– Next, you can select the folder location where the driver will be installed. By default, the driver will be installed in c:program FilesIntelIntel Serial IO. Click on “Next >” button to continue installation.
– Next, a list of driver components that will be installed by the installer is displayed. Click on ‘Next >’ button to continue.
– After successful installation, you should see setup completion screen. Click on ‘Finish’ button to complete the installation.
Silent Driver Installation via Installer
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Open a Command Prompt (cmd.exe) with administrator rights (ie. Run as administrator). Click on ‘Yes’ button in User Account Control pop-up window.
– Change the directory to where you unzipped the driver in Step 1 and then change to the “Driver_Installer” directory.
– To see all available options for the Installer, run command “SetupSerialIO.exe -?”
– You should see a window pop-up. For the “-l <LCID>” option which specifies the language of the setup dialogs, the LCID list is shown in below table. Click OK to continue.
– Run command “SetupSerialIO.exe –b –s” to start the silent installation. (Where as x represents the particular version number.) This process should take about 1 min to complete. When silent installation is complete, the system will automatically reboot.
– After the system has booted, you can refer to section 0 to check the driver version.
Manual Installation via INF File:
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Locate the INF files. (iaLPSS_GPIO.inf, iaLPSS_I2C.inf, iaLPSS_SPI.inf, iaLPSS_UART2.inf)
– Right click on the INF file and select ‘Install’ option from the menu to start the installation and then click on ‘Yes’ button in pop-up window.
– After the installation of all the drivers, reboot the system.
Download